Advanced Technology Center - CNC Tooling

Employing the Microhone® CNC Tooling and Abrasive System in an agile environment also allows for a greater gauge of quality and the opportunity to test processes for their ability to meet customer expectations for the finished component.

The PSS-Abrasives & Tool Division Advanced Technologies Center provides manufacturers with testing, documentation and the statistical data needed to meet job specifications. The end product of testing is a series of formal reports utilizing “Six Sigma” methodologies that document the kind of measured results customers can achieve and a blueprint of how to get there.

Advanced Technologies Center Details

Array
(
    [MIGX_id] => 1
    [MIGX_formname] => Two Columns 4060
    [fake] => 
    [header] => PAT Incometer
    [left-content] => 
    [right-content] => PAT Incometer | CNC Honeywell | CNC Tooling 
A PAT Incometer shows the roundness and straightness (cylindricity) of a bore down to 2.5 microns or 100 millionths of an inch.
    [xtra-options] => 
    [_alt] => 0
    [_first] => 1
    [_last] => 
    [idx] => 1
    [property.tpl] => @FIELD:MIGX_formname
    [property.tvname] => content-block
    [_tpl] => 
)

Array
(
    [MIGX_id] => 2
    [MIGX_formname] => Two Columns 4060
    [fake] => 
    [header] => Surface Profile Equipmnet
    [left-content] => 
    [right-content] => Surface Profile Equipmnet | CNC Tooling 
Surface Profile Equipment measures at the micron level and provides documentation of the surface of a component to reveal irregularities.
    [xtra-options] => 
    [_alt] => 1
    [_first] => 
    [_last] => 
    [idx] => 2
    [property.tpl] => @FIELD:MIGX_formname
    [property.tvname] => content-block
    [_tpl] => 
)

Array
(
    [MIGX_id] => 3
    [MIGX_formname] => Two Columns 4060
    [fake] => 
    [header] => Scanning Electron Microscope
    [left-content] => 
    [right-content] => Scanning Electron Microscope | SEM | Microhone | CNC Tooling 
A Scanning Electron Microscope (SEM) is used to give an accurate topographical picture of the finish, revealing scratches in the bore. The statistical readings that accompany these pictures determine whether the current process is meeting or exceeding the customers requirements.
    [xtra-options] => 
    [_alt] => 0
    [_first] => 
    [_last] => 1
    [idx] => 3
    [property.tpl] => @FIELD:MIGX_formname
    [property.tvname] => content-block
    [_tpl] => 
)